Loading... Please wait...

Categories

Phantom 2 Vision+ Ready to Fly Lightweight Multifunctional Integrated Aircraft and Camera w/extra battery

Hover over image to zoom

  • Image 1
dji
SKU:
CPPT000084B
Weight:
16.00 LBS

 Product Description

The Phantom 2 Quadcopter is the second generation Phantom quad-rotor RC helicopter from DJI and features a larger battery and improved prop design, and flying time that lasts to up to 22 minutes, compared to around 14 minutes on the original DJI Phantom Quadcopter. This product will appeal to a variety of potential users, from RC aircraft hobbyists who want to record their flights to videographers and photographers looking to open up a whole new range of shooting possibilities. 

Included with this "ready-to-fly" version of the Phantom 2 Quadcopter is a 6-channel, 2.4 GHz transmitter (TX) that comes pre-bound with the aircraft. It features an operational range extending up to 3,280' line-of-sight, depending on conditions. 

Because of the complexity associated with multi-rotor aircraft, the Naza-M V2 flight control system in the Phantom 2 relies on a GPS-based navigation as well as gimbal, compass, and other data to maintain flight stability and provide other assisted-flying features. While fully manual operation is possible, and can be unlocked using the Naza Assistant Software, most users, especially videographers hoping to get the smoothest possible shoots, will opt for GPS or GPS Attitude flight mode. In GPS Mode the Naza system keeps the Quadcopter stable and right-side-up when moving, and holds it in a fixed horizontal and vertical position whenever you release the sticks. 

New for this model, the Phantom 2 features a 5200 mAh battery system that has been simplified from the previous Phantom version. The battery now slots in without having to connect any DC leads, and features four LED indicators visible on the outside, tail-end of the aircraft helping you keep track of battery levels in flight. Charging is also simplified, with all of the charging circuitry now built into the battery itself, there is no more separate balance lead to worry about plugging in. Because of this design, the Phantom 2 battery cannot be charged with all-purpose balance chargers, only chargers made specifically for it.

The Zenmuse H3-3D Gimbal is used mount a naked GoPro HERO3 or HERO3+ action camera on the Phantom 2. Unlike its predecessor, the H3-2D, the H3-3D provides not only tilting and canting, but also allows the camera to pan side-to-side. The GCU (gimbal control unit) is built into the Phantom 2 so there is no additional internal hardware to install and operation is plug-and-play. Adjustments and firmware updates can be made using the assistant software for Windows, which is downloadable from DJI. 

Warning: Never use the DJI Phantom 2 Quadcopter with your GoPro camera when both devices have their Wi-Fi systems turned on. The DJI Phantom's Wi-Fi and the GoPro camera's Wi-Fi run on the same frequency, so if you use them together when both Wi-Fi systems are engaged, the DJI Phantom's transmitter will lose the ability to communicate with the DJI Phantom Quadcopter. Whenever this happens, you will not be able to tell the Phantom where to fly. This may result in loss of property or damage to your equipment.

Phantom 2 Specs

Charger & Battery Parameters
Charger AC Input 100 - 240 V
Battery Type 11.1 V, 5200 mAh 3 S lithium-polymer (LiPo)
LED Indicator Four LEDs indicate remaining capacity / charge status
Handheld Transmitter TX Parameters
Working Frequency 2.4 GHz ISM
Communication Distance Up to 3,280' (1000 m) line-of-sight depending on conditions -This Transmitter is FCC approved. Please check your local laws regarding use outside the USA
Receive Sensitivity -93 dBm
Control Modes Mode 2
Transmitting Power Not specified by manufacturer
Power Source 4 x AA Batteries
General
Take-Off Weight < 3.1 lb (< 1400 g)
Max Yaw Angular Velocity 200°/s
Max Tilt Angle 35°
Max Ascent/Descent Speed 20.7 ft/s (6 m/s)
Max Flight Velocity 32.8 ft/s (10 m/s)
Dimensions Propeller Length: 9" (22.86 cm)
Diagonal: 13.8" (35 cm)
Weight Not specified by the manufacturer

Phantom 2 with Gimbal Specs

Performance
Controlled Angle Accuracy Tilt/Roll: ±0.02°
Yaw: ±0.03°
Maximum Controlled Rotation Speed Tilt Axis: ±130°/s
Controlled Rotation Range Tilt Axis Control: -130 to +45°
General
Supported Flight Control Systems DJI Phantom 2
Operating Current Consumption Static Current: 400 mA at 12 V
Dynamic Current: 600 mA at 12 V
Power Requirements Uses Phantom 2 Flight Battery
System Requirements For Assistant Software: Windows 8, 7, Vista, or XP SP3
Operating Temperature 50 to 122°F / 10 to 50°C
Dimensions Gimbal 3.8 x 3.7 x 2.89" / 97 x 95 x 73 mm
Weight Gimbal: 5.9 oz / 168 g -- without camera

In the box

Phantom 2 Quadcopter 

  • 6-Channel Transmitter (TX) 
  • 8 x Self-Tightening Props 
  • Landing Gear (Pair) 
  • Phantom 2 Quadcopter Battery 
  • Phantom 2 Vision Battery Charger 
  • USB Cable 
  • Wrench

 Product Videos

DJI - Introducing the Phantom 2 Vision Plus
  • DJI - Introducing the Phantom 2 Vision Plus
    Eric Cheng, Director of Aerial Imaging introduces the Phantom ...

You Recently Viewed...

 

 

What's News

newsletter

Credit Card Processing

Copyright 2017 Sga Imaging, Inc.. All Rights Reserved.
 Sitemap | BigCommerce Premium Themes by PSDCenter

Click the button below to add the Phantom 2 Vision+ Ready to Fly Lightweight Multifunctional Integrated Aircraft and Camera w/extra battery to your wish list.